If you've ever tried to install a modern car stereo in a pre-1960s vintage automobile, you've probably run across the problem of getting stereo sound in a vehicle with only one center dash speaker. When I owned a '56 Studebaker Hawk, I faced two not-so-great choices: modify the car by installing speakers in the doors or keep the car stock by putting clunky speaker boxes on the back deck. We just got in a new product that gives vintage car owners a much better option.

A speaker for your single dash opening
Retrosound is a California-based company that makes modern, iPod-compatible in-dash receivers that'll fit in vintage cars without modifications, and now they've branched out into speakers. In addition to the usual speaker pairs for different size openings, they also offer three models designed for the single speaker opening in your dash: a 5"x7", a 4"x10", and a 6"x9".

Dual voice coil solution
And here's the "why-didn't-I-think-of-that?" idea from Retrosound: each single speaker has a dual voice coil woofer and two Mylar dome tweeters, with each voice coil connected to its own tweeter. You just connect the right and left speaker outputs of your in-dash stereo to the two voice coils and presto - you've got stereo sound from one speaker location. Now, you won't get the big stereo spread that you'd get from speakers on each side of your car, but you won't have to cut up your dash or doors either, and that's a beautiful thing for many vintage car fanatics.

Real world solution
Another plus - Retrosound understands that older vehicles usually don't have a lot of room for speakers with big honkin' magnets, so these speakers use neodymium magnets to keep a low profile - they're all less than 1-3/4" deep. So a pair of these speakers will even work well in vintage cars with two speaker openings. They'll fit in most doors, they'll handle plenty of power, and you can connect both voice coils together for 2-ohm impedance to get more power out of your outboard amplifier.