Browse by Tags

I am wondering what amp I should use to power two Kenwood w3011 12" subs (400rms each) in a Q-logic box. I have my eye on the Infinity reference 611a (657rms x 1 at 2 ohms). I'm wondering if that means I would get 328.5 watts to each sub, and if so would it matter that they are underpowered...

so i just got two 800 peak and 50-400rms kickers ( Kicker CompVR 07CVR124 ) I want to get an alpine amp to power them. I want the 800watt( Alpine MRP-M850 )amp but the 400 watt( Alpine MRP-M450 )amp is twice as cheap.Is the 400 watt one enough?

This is the first time I have ever posted on a message board so I hope I dont screw this up too much.. I recently purchased the Rockford Fosgate Punch P550.2 to power two Kicker Comp VR 07CVR124 12" Dual 4-Ohm Voice Coil Component Subs. I plan on running the speakers into a 2-Ohm load. They will be in...

That sounds like a good system. The only thing I could find that may be better for your system is a Boston bass package that we put together. It should give you the level of bass that you seek. Any other ideas?

the sub is a SVC. and im trying to build my own box for my truck. it cost to much for the one i wanted so im building, and it will be a sealed box

i used to have a sub in my truck but it was giving me some problems i.e the amp i beleive. so im starting all over not rushing in to it, im reading up on what i need, but i just wanted an extra, yeah the will work great or...... what the hell are you thinking. i have a 12in Memphis power reference...

This might sound like a silly question. I would like to power a set of component speakers in the front doors of a Honda s2000 and a single sub in the trunk. Do I then need a 3 channel amp? Can I use a 4 channel and bridge two channels? What is the best way to drive 3 channels? Thx.

ok so i have two 2ohm dvc subs and a mono amp(1 ohm stable). ok so if i were to wire both subs at 1 ohm and wire the subs together would that equal 1 still or would that bridge even farther down to a half ohm? right now i have them at 4 each so am i at 2 ohms together? im just trying to get the most...

Hello people, I'm new to car audio. Just put in my first non factory stereo in vehicle of mine. Well after that, I am deciding to get an amplifier and a sub. I have already picked out the sub. It's the Infinity Reference 1252W. It says it can handle 300W RMS and 1200W MAX, but I'm not too keen on much...

I have a pioneer head unit with a front speaker rca output, and a subwoofer output. I am purchasing a 4 channel amp. My questions are this: number one does the front rca output on my deck control all 4 front speakers, or just the front two speakers? My original plan was to bridge the amp to run the subwoofer...

I have an 01 Maxima and i have had an amp and box installed. My original set was okay. I just got my friends box which was [extremely] loud ... in his car. It's no where near loud...barely audible in fact... [mod edit: language] Is it more than likely that the genius who installed it originally...

i have two 2 channel amps one 600w max 170w rms, one 400w and one single voice coil 800w pioneer subwoofer can i bridge my amps together

I would recommend the 3rd option. This will allow you to use all of your equipment (to get better sound from the 6-1/2" speakers). The power handling of your subwoofer and the speakers is fine and should work out well if you can find a tri-way crossover. Now, you should still find out (if you do not...

garrotbunx: How much of a difference wud it make if I had 2 subs? Could i then wire one subwoofer in series with the left 6x9 speaker and the other in series with the right 6x9? If I do it this way, can it kill the amp? If they are a pair of matching subs, it makes a huge difference. You want them in...

i agree with tiger on this one a "small" 4 channel amp will really make the rest of the system will sound good. use a seaprate amp to power a sub. you have a couple of choices here. you can build a box for the sub and make sure no moisture can get in to the speaker or the wood. I recomend coating the...

Okay, there are many things that need to be taken into consideration. First, when an amp is ran in tri-way mode (which the AP600 is capable of), you will need a tri-way adapter. We do not have one at this time, but we used to offer the PAC TM-100 tri-way crossover. This adapter can only be used with...

If you want to use the stock location, then there may be a few that will fit. You can use our vehicle fit guide to find out which ones will fit into the stock location. This should help you get an idea of what to look for.

i have a 2004 ford expedition eb with the built in sub. i see a little amp on top of the sub. i think i blew it,cuz the sub is not working.can i put a bigger aftermarket amp in and run some differant subs ??

I'm thinking about putting two of the Kenwood KFC-W2510 10" subs in my truck, what would be the best amp to use?

I have a question about wiring my new, Lightning Audio amp to my stereo. I am having a hard time figuring out how I am going to connect the amp to the stereo. How do I get the wires to reach the back of my Kenwood deck? I am only 17 and I am trying to figure out how to install my new amp/sub set up and...

When an equalizer (Kenwood KGC 4042-A) is in use and throttled up, does that make the amps put out more watts? Or does that just increase the decibels? Also I have two 700RMS subs and two RF Punch 800 amps. Should I give all 800 to each sub? Or can the amps be tuned to only give 600-700 RMS per sub?...

Hi every one. I have a couple quick question, I have a Kenwood KAC-8103D Amp. It is rated at 300 RMS @ 4ohms and 500 RMS @2ohms 1000 Peak. I had it hooked up to a single 12" Sony Xplod sub that is 350 RMS and runs 4 ohms 1200 Peak, because I have an SUV I really had no need for two subs in the car because...

I have a boat Im going to install a system in. I have the Sony 52w head unit, a pr of Sony 5.25 " 160w 4ohm for a tight spot and a pair of Sony 6x9 220w 4 ohm. I want to run an amp and add a single sub. Does anyone have any recommendations on amps,a sub, and wiring? Should I try to stick with a powered...

I did some checking on Rockford Fosgate's web site and they show the T1693C speakers as handling 110 watts RMS. This means that you will want to get the JBL GTO75.4 II 4 channel amp to power them. After researching your subwoofer on other sites, it appears that it will handle up to 300 watts RMS power...

JCF07, You have made an excellent match. The subwoofer will handle up to 300 watts RMS and the amp will outputs 300 watts RMS to it. Great job!