Free Shipping on Everything.
60-Day Money-Back Guarantee | Lifetime Tech Support

Browse by Tags

Site Root

Site Root
site root
Tagged Content List
  • Forum Post: Is this the correct wiring?

    Is this the correct way to wire my set up? /\ /\? Or is this the correct way? V V? Another question, where dooes the power lead go (the wire which tells my amps that my deck is turned on?) Thanks for the help!
  • Forum Post: Battery Terminal Installation?

    i am going to be hooking up a second amp to my system and if i used a powerblock i would need 2 ga. power wire running from the battery to the distributor block, then 4 ga. wire from the block to my amps. however, i allready have an abundance of 4 ga. wire which led my to think about getting a new battery...
  • Forum Post: 2007 Chevy Impala Amp for sub Install. PLEASE HELP

    ok. i just bought a 2007 chevy impala for my finace. we want to transfer her sub system from her truck to her new car. i used to have it installed on a aftermarket head unit. but now she wants to keep the Factory Head Unit. I have all the wires ran, and power to turn it on with, only problem is i am...
  • Forum Post: Wiring 4 input crossover? and other wiring Q's

    So I recently purchased the Polk Audio MMC5250 component speakers to install in my truck. I have no 4-channel amp yet and am just running them from my pioneer head unit. So when I looked at the crossover it has a + and - tweeter and woofer output which is normal. But then it has 4 (2 +, 2 - ) inputs...
  • Forum Post: 2007 silverado new body style amp install

    if i want to install and aftermarket amp and reuse my stock speaker wiring with a set of aftermarket speakers where do i need to tie in my aftermarket amp inputs with the factory system? I was told that I cant take the speaker outputs directly from the back of the radio because the factory amp is not...
  • Forum Post: Wiring a Alpine IVA-D310 with additions

    I recently purchased a used Alpine IVA-D310. I plan to install a [ mod edit : removed. violates our policy on illegal or unethical info] , KCA-i420 for the Ipod and a KCA-SC100 for the satellite radio. I know the unit, the brain of the unit and the KCA-SC100 will need power. Now my question is can I...
  • Forum Post: Pioneer DEH-P3000IB wiring question

    I just upgraded from a Pioneer DEH-1800 to a DEH-P3000IB, and I'm a little confused by the wiring harness. The new unit will work with the old harness, and it's fully functional from what I can tell. The new harness has 2 wires which are different from the old harness. However, these wires are not...
  • Forum Post: installing two amps last question tigerheli

    On the chart u gave me, i filled everything out, but what makes the biggest different in between deciding whether a 2 awg or 4 awg should run to the distro box is the length. If i put15 feet in, it says 4awg, but when i put 17 feet in, it says 2 awg. i dont know how many feet it is right now, but...
  • Forum Post: Wiring harness for a 2004 Ford Expedition w/ Factory Nav unit.

    I'm trying to install a Pioneer Navigation headunit in my 2004 Expedition and I need to find a wiring harness for this. I have checked online and at my local stores and nobody seems to carry it or even know where to look for it. I have also checked the Kit and Harness company websites like Bestkits,...
  • Forum Post: Re: do i have to cut and splice wires?

    If like me, you prefer not to blister your fingers with a soldering iron, a crimp kit makes quick work of the splicing task. I've used them on several installs with great results. The aftermarket-to-factory harness allows you to do most of the work at the kitchen table rather than practicing contortions...
  • Forum Post: how to wire a 4x6 as a center chanell speaker

    right now i have two 4x6 rf punch speakers. and 1 4x6 kicker ds speaker. i have the kicker speaker wire to the rf spekers with the positive wire from the right and the negative. all the speakers are 4 ohm. is this a good way to wire it or can anybody give me a better option. thanks in advance
  • Forum Post: amp/sub help please

    i have a 2-channel bridgeable amp thats 4ohms stereo stable and two 4 ohm DVC subwoofers.the amp is cheap and i will not mention the brand for fear of getting laughed at but i want to run the subs bridged in mono for maximum power.is it safe to run them in parallel.is it safe to run a 4ohm amp at 8ohms...
  • Forum Post: subs match amp? and wire gauge

    i have 2 svc pioneer subs 4 ohm 250 watts rms. will my kenwood amp match it? it is 500 watts rms at 2 ohms and 300 watt rms at 4 ohms. so if i wire it in parallel it would operate at 2 ohms therefore delivering 500 watts i believe. is my thought process right? or would it still be 300 watts rms? And...
  • Forum Post: Please!!! Help Needed with Wiring kits??

    hey guys im having trouble on identifying the right wiring system for my car audio Head Unit - Keenwood DDX 719 my speakers - Rockford fosegate P1653 (3way) and P1652-s (2 way) My subs - 2 kicker COMVT 654 6.5 inch 4ohms subs. AMPS - infinity 475a and rockford fosegate P300-1 i would like...
  • Forum Post: Subs Wired in Parallel - Two Sets of Wires to Amp or One??

    So I've got an older pair of subs, theSony XS-L1236 (300W RMS @ 4 ohms, SVC): http://www.crutchfield.com/S-zzHuUCX5XNd/p_158L1236/Sony-XS-L1236-Single-12-Sub.html And have a Pioneer GM-D8500M pushing them (600W RMS x 1 @ 2 ohms): http://www.crutchfield.com/S-POCZ5dfGHkZ/p_130GMD850M/Pioneer...