Free Shipping on Most Orders

Browse Forum Posts by Tags

Showing related tags and posts for the Speakers forum. See all tags in the site
  • Speakers

    I have alpine type r subs that are wired in parallel with an audioque 1200D amp, i also have Alpine SPR-17S in the front with Alpine SPR-17C speakers in the back. I have an alpine cda 9884 headunit. Im going to be getting a Alpine MRP-F300 to power the component speakers soon, my question tho is should...
    Posted to Speakers (Forum) by Holmes2190 on Sat, Nov 7 2009
  • Components for my 2000 Honda Civic Coupe

    I'm in the process of picking out some gear for my 2000 Honda Civic Coupe. I plan on using some components up front and some 6x9's for rear fill. I'm pretty much sold on the Alpine Type X speakers, but need to do some additional research on their fitment. I've taken the door panel apart...
    Posted to Speakers (Forum) by ChrisC on Sun, Nov 1 2009
  • Re: How to get better mid-range?

    I think I set it up as good as I can using my current equipment (also, the speakers in my Accent hatchback are in less-than-optimal places and at less-than-optimal angles). I set the 1000Hz to +2, 10000Hz to -3, and each crossover to a little over 80Hz. I guess you can't look a gift horse in the...
    Posted to Speakers (Forum) by John023 on Wed, Aug 12 2009
  • First Time Buyer: considering a simple upgrade over stock but have questions

    I recently got my first car: a 2000 volksvagen beetle but have been driving it for years. I have never been impressed with the car speakers so I want to upgrade them but not substantially because I do not want to invest too much in this car and I do not need 'loud' blasting music. I just want...
    Posted to Speakers (Forum) by philparty on Tue, Jun 23 2009
  • Speakers for Apline HU

    Buying a Alpine CDA-105 for my son Integra and 2 of the vendors/installers I am talking to want to install Alpine SRS-600 speakers in the doors and back. We may do a component Type S or Type R in the door instead to replace the stock tweeter. After reading a post here earlier I am worried that the speakers...
    Posted to Speakers (Forum) by criss on Thu, Jun 4 2009
  • Infinity Kappa 462.7cfp + Reference?

    Well, as I posted before, my previous Alpine headunit was stolen, along with the rear Infinity Kappa 6" 3-way Coaxials I had installed in the rear with felt boxes. Now, Since I just ordered a replacement (iDA-X305; quite the upgrade I must say), I'm also planning on replacing those lost rear speakers...
    Posted to Speakers (Forum) by victorx10 on Thu, May 21 2009
  • What to do about factory tweeters on Jeep after installing aftermarket head unit, 4-ch amp, 4 door speakers

    I have a '03 Jeep Liberty Limited and just installed (details below) aftermarket tuner, XM tuner, 4-channel power amplifier and 4 door speakers. I still have the front factory tweeters installed. It is hard for me to tell how it would sound without the tweeters installed, but they definitely ruin the...
    Posted to Speakers (Forum) by iJeep on Tue, Apr 28 2009
  • Bose/Monsoon in Grand Prix

    I have a 99 Grand Prix and i was looking to hook up either a bose or monsoon system in my car. I was wondering what kind of re wiring i will have to do to make this work. Can I wire the amp straight into my alpine head unit or is there a different way that it has to be done. Thanks for any advice
    Posted to Speakers (Forum) by platoon5 on Sat, Mar 14 2009
  • Tuning New Alpine System, Imaging & Efficiency; Rear Speakers!

    So far so good, I have been listening to my Alpine system for over a month now, I have re-tuned my JL-Audio 12w6v2 as it has broken in over the month. My Sub Amp (MRP-M500) is set just over 75Hz, below 80Hz in a sweet spot @ about 3/5 Gain. I am unsure if my Amplifier heats up enough on long trips to...
    Posted to Speakers (Forum) by waldojeffershead on Tue, Feb 17 2009
  • Disassebling an Alpine SWR-1042D

    I have an Alpine SWR-1042D and it cuts in and out. I would like to open it up and see if the leads on the inside need soldering. How do I take the leads box apart without breaking everything. Also do I need to remove the screws on the inner ring.
    Posted to Speakers (Forum) by celinaman060 on Thu, Jan 22 2009
Page 1 of 8 (73 items) 1 2 3 4 5 Next > ... Last »