-
I recently had my subwoofers from CF professionally installed. They are Infinity 1052w subs and CF stats showed minimum air space of 0.75. My enclosure has 0.8 per sub, so cutting it pretty close. I purchased 1 sq ft of polyfill for each sub and after my install was done the installer had not used the...
-
I am thinking of purchasing 2 Infinity 1260w subs and paralell wiring them to a Sony Xplod-ZZR3301 Mono sub the amp has an rms of 600 at two olms and the subbs are 4 olms with rms of 300w each. According to the guides and such this should work but unsure. I am looking to have good sound, loud enough...
-
I have 2 Alpine Mrp m-650 amps (2 ohm stable, Mono). Each one going to its own 12" Alpine Type R (4-ohm). My question is is this a good match and what are some tips for reducing rattling and improving sound quality. Also I bridged the power wire instead of using a distributor. Will this be ok until I...
-
Hello everyone, I am having some problems with my basslink. I have had it about 2 1/2 years and it has worked great. Now all of a sudden, it started making a thumping noise when I would start my truck, eventually it would go away and it would work fine. Now it does that, and my fuse blows. I am clueless...
-
Hi everyone. I'm planning on a sub upgrade for my car. I want to put pair of subs . I 've got amplifier MTX 8100D mono 1000w@2 Ohm & ported box 1.9cu.ft. for each sub. Just want to get feedback from you guys regarding these three sub's models... Alpine SWR-1242D Type-R 12" subwoofer with dual 4-ohm...
-
Hello Skyline420 and welcome to the Crutchfield forums! Dual 4-ohm speakers will result in either 2 or 8 Ohms impedance as you mentioned. However, since you will have two subwoofers, you have a few options. First, if you go with a mono amplifier you will be running it at a 4-ohm load which isn't ideal...
-
so i just bought an opened infinity 12'' dual voice coil subwoofer for dirt cheap. its 300rms and 1000 watts peak, and its 2 or 8 ohms, this is what best buy online says. while i was at best buy trying to figure out what amp to use he told me that an alpine mono amp ( http://www.crutchfield.com/App/Product...
-
I am looking to add a Basslink sub to my 2000 maxima. I just purchased a Alpine MRP-F250 amp and it is powering 4 alpine 6.5's in the doors. The amp is under the passenger seat. I have 8 guage wire running directly to amp from the battery... Will I need a larger guage or can I run more 8 guage from a...
-
im planning on buying one Infinity Reference 1250w 4ohm 12" Component Subwoofer with a power range of 60-300 watts RMS (1,200 watts peak power) and i was planning to power it with the Profile AP1200 se all specs here http://www.crutchfield.com/S-c001BMDL5uD/App/Product/Item/Main.aspx?I=489AP1200 ,my...
-
I'm going to be installing the Basslink II in my wrangler and I have a quick question. I've got an amp powering my 4 speakers, and the remote turn on wire is connected to that. Now how do I wire that to my sub as well... From what little I've learned from searching on the internet, I don't need to run...