-
ok, this is my setup; 0 awg wire (150amp fuse) run to D-block. Then 4 awg (60 amp fuse) run to a JBL CS60.4 and another 4 awg (80 amp fuse) run to a kicker zx750. my problem; i recently just got the 0 awg hooked up to hook up both amps simultanesly. When i play the volume loud, 35 out of 40, the bass...
-
I recently had my subwoofers from CF professionally installed. They are Infinity 1052w subs and CF stats showed minimum air space of 0.75. My enclosure has 0.8 per sub, so cutting it pretty close. I purchased 1 sq ft of polyfill for each sub and after my install was done the installer had not used the...
-
I have a 1997 Toyota Corolla and I am installing a Bazooka 6" powered sub and I need to find the best location and the right kit to install this
-
I am a novice at Car A/V. Just a couple weeks ago I installed my first door speakers which wa an experience. First door took over an hour, second door took less than fifteen minutes.. haha. Anyways... tomorrow my shipment of two Alpine eX-10 ( http://www.crutchfield.com/p_500EX101/Alpine-eX-10.html?search...
-
I have a infinity 611a mono block sub amp i also have 2 sony octagon shaped subwoofers that are 350 watts rms each my amp is about 425 rms x 1 at 4 ohms and the subs are single voice coil I want to use just 1 sub and wire it to the amp but right now i have two of them in a box and they are both wired...
-
The all-in-one rear mount DVD player (Audivox) has died in my 2005 Dodge Grand Caravan. The monitor works flawlessly and I would like to keep it. Would it be feasible to remove the Dodge's factory stereo and replace it with a DVD player and push the video through the auxiliary input of the Audivox? The...
-
His father bought a budget amp/sub combo I had never heard of the amp (it's a 400 watt one) however I think the name was something like "audiobass" and the sub was a 10inch kenwood. I don't know which one specifically however, he needed the room in the trunk of his grand am so he unplugged it and moved...
-
I have a 2006 pontiac g6 and would like to replace the factory head unit for a double din. In doing so what problems would i face? What funtionality would i lose with a new head unit. Help would be appreciated! Thanks!
-
Alright, i finally got the money to make this happen. This is my setup now; All in a 1998 Ford Explorer XLT 4 awg wire to a Kicker ZX750.1 Monoblock amp pushing two 15 CVRs. This is what i plan to add; 4 channel JBL CS60.4 pushing two kicker(or kenwood) 6x9s in bridged mode. The final question is, what...
-
Car - '05 Hyundai Sonata Installed a Sony MEX receiver and discovered the factory amplifier is external, in fact i have not located it yet. I've done the math and with my component speakers i might as well use the installed amp for some added power, to keep up with the 12's. Any thoughts on how to get...