Free Shipping on Most Orders

Browse Forum Posts by Tags

Showing related tags and posts for the Forums application. See all tags in the site
  • need a bass specific 6x8

    I recently purchased an Alpine IDA x200 from Crutchfield... I want to change my factory 6x8 speakers. I cannot afford a sub at this time, but can somebody recommend a speaker that does some justice to bass?? I was thinking of the Infinity Kappa, but recently found from a review that it doesn't have...
    Posted to General Car A/V Discussion (Forum) by jagdish on Sat, Aug 15 2009
  • Re: Sub Selection

    This is an awesome deal on an awesome amp, and should power the 4 Polks well. It has really nice HPF options also. I wouldn't hesitate. http://www.crutchfield.com/p_115CS604/JBL-CS60-4-Z.html?tp=115 I would also get some 6.5" foam baffles behind those speakers. I was skeptical about the baffles...
    Posted to Subwoofers (Forum) by GLH on Mon, Jun 22 2009
  • Subwoofer stopped working...

    Gear: I have two Polk/MOMO 2104 10" subs in home built sealed boxes. They are wired with 12gauge wire to a Alpine MRP-M500 in parallel. The amp is powered through a distribution block to a 2 farad capacitor then a fuse to the battery. Problem: After I finished building the boxes and installing and wiring...
    Posted to Subwoofers (Forum) by 77StreetVan on Thu, Dec 25 2008
  • Re: New Polk MM6501 and Q-Forms Kick Panels

    I have looked into the differences between the MM6501 and the db6501 speakers. The frame diameter on the MM6501 speakers is 6.5" which is the frame diameter of 6-3/4" speakers from other manufacturers. The frame diameter of the db6501 speakers is closer to 6.3". This means that the MM6501 will fit 6...
    Posted to Speakers (Forum) by Paul on Fri, Oct 10 2008
  • Profile Amps, Good or Garbage?

    I am looking for an amp to power my 6.5" momo components. They are rated to handle 125 watts rms. Would the Profile HA1000 or AP1000 be a good amp for this application? Both are 2 Ch's rated at 160 watts rms @ 4 ohms; the momo's are 4 ohms's as well. I could just turn the amp down a bit to compensate...
    Posted to Amps (Forum) by Nick Jones on Wed, Oct 8 2008
  • Re: Polk mounting depth?

    Those are some good questions and I'll try to clear them up a little for you. The Polk 651s speakers are considered shallow-mount because of their mounting height measeurements and not the mounting depth. In this case, the 651s speakers only need about half an inch of mounting clearance and the 651 speakers...
    Posted to Speakers (Forum) by Warren on Mon, Sep 22 2008
  • Need help with configuring a better sound system for my truck

    The speakers on my factory installed truck stereo were blown, so I recently replaced them with front and rear Polk speakers, and a JVC HD Radio/CD, Bluetooth and IPod ready system. The problem is my music is a little flat, and I am not sure if just a subwoofer will enhance my music experience (I play...
    Posted to General Car A/V Discussion (Forum) by Mitsu on Tue, Sep 9 2008
  • Alpine xDA-x100 receiver ~ speakers/more?

    Today I had an Alpine xDA-x100 receiver installed in my '02 Highlander Ltd. It had the JBL Premium sound package, but I wanted the iPod ready, Sat ready receiver. I've listened to a variety of music on it ~ jazz, classical, rock, choral. It blows the stock unit out of the water. I thought the JBL Premium...
    Posted to Receivers (Forum) by DeniseR on Mon, Sep 8 2008
  • Polk MOMO 6 1/2 component speakers in a del sol...

    I see alot of 6 1/2 in my list of available speakers, yet these are not.... why? does anyone know? i drive a honda civic del sol, and i want to upgrade my sol's sound but i want great sound for decent price, friends recomened polk momo. they have them, and they sound amazing.... my bold pattern on my...
    Posted to Speakers (Forum) by Namco on Sat, Sep 6 2008
  • polk momo mmc690--too bright!

    had these a couple of weeks, running off a profile ap1000.. definitely clean speakers but they don't seem flat to me by any means, especially in the top and bottom end. the bass seems somewhat attenuated and to get up to the full 100 rms out of them i have to run a high pass (80hz), and the tweeters...
    Posted to Speakers (Forum) by atma on Mon, Aug 11 2008
Page 1 of 19 (181 items) 1 2 3 4 5 Next > ... Last »