-
I have looked into the differences between the MM6501 and the db6501 speakers. The frame diameter on the MM6501 speakers is 6.5" which is the frame diameter of 6-3/4" speakers from other manufacturers. The frame diameter of the db6501 speakers is closer to 6.3". This means that the MM6501 will fit 6...
-
Those are some good questions and I'll try to clear them up a little for you. The Polk 651s speakers are considered shallow-mount because of their mounting height measeurements and not the mounting depth. In this case, the 651s speakers only need about half an inch of mounting clearance and the 651 speakers...
-
I see alot of 6 1/2 in my list of available speakers, yet these are not.... why? does anyone know? i drive a honda civic del sol, and i want to upgrade my sol's sound but i want great sound for decent price, friends recomened polk momo. they have them, and they sound amazing.... my bold pattern on my...
-
had these a couple of weeks, running off a profile ap1000.. definitely clean speakers but they don't seem flat to me by any means, especially in the top and bottom end. the bass seems somewhat attenuated and to get up to the full 100 rms out of them i have to run a high pass (80hz), and the tweeters...
-
I have done a lot of research on the polk momo mmc 6500 components. I like them and would like to put them in my front doors. I have the extended cab three door with out on star and a factory head unit. I also plan on putting two decent subs under the back seat. The box i have is a dual chamber. each...
-
I currently am running two sets of polk audio db's (5.25s up front and 6x9s in back) these are being run off a Kicker750.5 along with a 10" L5. My problem is that,although it's loud, In want it to be louder. I was wondering that since my car has 4" speaker openings in the back and 1" tweeters up front...
-
I'm currently debating between 2 setups: 1. Polk MMC6500's front and rear powered by an Alpine PDX 4.150 2. Kappa 60.7cs's front and rear powered by an Alpine PDX 4.100 I currently have a Kenwood KDC-x491 head unit and stock speakers, and am looking for a system that has good sound quality, but can still...
-
Hey guys. Just started really using Crutchfield and have learned a lot already. Hopefully you guys can help me out. I have a 1999 4 Door Blazer with a Pioneer DEH-P7700MP deck. I have some crappy aftermarket speakers in all the locations right now (4"x6" in the dash, 6 1/2" in all four doors). I got...
-
Hey there, Sorry for the delayed response. Our fit guide is based on an "easy fit", so when it says that you can fit up to a 5" speaker, that doesn't rule out the possibility of installing a 5 1/4" speaker. It will mean you will have to do some modification. In this case, as long as the mounting depth...
-
The issue with the Alpine SPX-17REF 6-3/4" Component System is that they need 2-9/16" for the depth. Your vehicle only has 2.2" to offer. This means that you will need to find some way to overcome the depth issue. You can try raising them, but you will encounter an issue there as well. These speakers...