-
Bob, I can see why you need help/are confused. I found the manual online for and it is the most uneccessarily complicated thing I have ever seen. In the future, get an Onkyo. The setup is wayy easier. IF you had an Onkyo for instance, all you would have to do is press "setup" until "spkr config" showed...
-
I have a Yamaha RX-V750 AV Receiver that has a optical input, a coaxial digital input, an s-video, and a composite input as well as seprate 2 channel rca-type inputs for audio. I want to connect to it a blue ray dvd player that I can connect to Net flixs over an internet connection. I have some questions...
-
A question from a total audio newbie: I have a Yamaha HTR-5930 receiver. Right now all it's connected to is my ipod and two Bang & Olufsen Beovox S50 speakers. The receiver and those two speakers are in my living room, so I cannot hear the music in my bedroom. I want to connect two small, inexpensive...
-
I have a Sony KDF-E42A10, Sony DVD player (no HDMI), new Yamaha RXV663 A/V receiver, and cable TV service with HDTV and a recordable box (similar to TiVo). I am still playing around with the settings on the Yamaha with respect to inputs, audio, settings, etc. What I would like to know is the best way...
-
Yes it can. From Crutchfield's Hands-on Research tab of the receiver: High-Quality Power Amplifier: With 100 watts of power per channel (at 8 ohms, 20 Hz-20 kHz, 0.019% THD), the RX-797 delivers solid, reliable audio performance even when driving both A and B speaker systems at the same time . If you...
-
I am looking at this reciever to replace my Sansui 9090DB. I see that there are 2 speaker inputs. My question is, will this unit drive both pair at the same time, or just one pair at a time? My Sansui has 3 inputs with "A+B" and "A+C" selections. I am presently driving 1 pair Bose 501 Series II and 1...
-
Thanks for the prompt response. The room is 13' x 20' with a vaulted ceiling and one end open to another room. The tv is on the long wall. The tv will be used 90% for just that, tv viewing. We probably watch less than 10 movies a year. Very seldom play a game. My receiver is approx. a year old and is...
-
Yamaha's trouble shooting method for early shut off applies here. "1, disconnect all of the speaker wires from the back of the receiver. 2, turn the receiver on, and turn the volume control up to about half way. If the receiver stays on, please go to Step 3. If the receiver shuts off right away, the...
-
I am at a loss. I made some changes in my home theater system and now I have this "Check SP wires". I've undone/re-attached all wires to the receiver. I shorteneded the exposed wire so more insulation is present. But I can not get ride of this Check SP Wires. I had an older Yamaha receiver that showed...
-
That sounds like a great plan. Keep us updated as your build comes together!