-
I just bought 2 of these Infiniti subs (awesome deal) to go in a custom enclosure under the rear seat of my 07 Sierra Denali. They are dual voice coil 4 ohms, and I read on the sight that a 2 channel amp would be preferred for this type of sub, instead of a mono amp. They handle 250 RMS each. I have...
-
Just installed a new 1200w sony explode amp up to an eclipse 12" sub. For some reason the amp seems hot but temp does not increase or decrease. any ideas how to cool it off? Its mounted in the trunk with a micro farad cap next to it. cap is nice and cool. also head unit also gaining some heat. anyone...
-
i have a zx750.1 with 2 cvrs 15's im planning on getting a JBL CS60.4 pushing 4 6by9s this is what i was planning to do; take out the 4 awg wire, put in 2 awg (with 150 amp fuse) run it to a distribution block (with 80 amp fuse for zx750 and 50 amp fuse for the JBL CS60.4) then split it into two 4 awg...
-
alright. so this is what i did; i moved my amp to a different location, while doing so, cutting off 1 foot and ground and 1 foot of power wire. all this while the negative power cord was off my battery this is what happaned, no bass =---- i later checked it once more and realized that i had accidently...
-
So i have a zx750.1 pushing 2 15's im planning on adding a jblcs60.4 to push 4 6by9s, i concluded that i need a distro box to the 2 amps. sooo... Should i get a fused dsitro box or not. and what it is the difference between fused distro box and non fused distro box (and dont say one is fused and oter...
-
Hey everyone, Ok, so I wanted to find this out before I buy this amplifier. But I currently have one 12" MB Quart subwoofer, possibly putting a 2nd in soon. I have a 600 watt amp by Power Acoustik, but it's just not enough "bump" for me. So I was shopping online and found a 1600 watt 4-channel amplifier...
-
I've just purchased (and hope I didn't make a mistake) a new Sony Xplod XM-GTR2022 amplifier. I have 2 new MTX 10" TC510 (thunder 500 series I believe?) subs and a Alpine iDA-X200 deck in case u need to know this. Anyways, from reading the online User Manual for the amp, I don't see any way to properly...
-
I have an old school Rodek 2300i 2 channel amp, and a Rodek crossover. I have one 15" MA audio dual voice coil sub and need to know the best way to wire it. Help please
-
I'm having trouble finding a amp to suit my subs. I have two Rockford Fosgate P3SD212 12" subs in a sealed box, and I cant find a amplifier to run both of them at the recommended wattage. I really would like to avoid running two amplifiers in my truck due to limited space, I'd like just one amp if at...
-
so far noone has been able to give me any real help on this one. I have a McIntosh MC443M Power Amplifier. On one side is has the inputs for the power and ground wires, nothing else. Then on the opposite side are the A&B speaker terminals to run the speaker, the highpass outputs, and the inputs....