-
Hello jeeplib2003 and welcome to the forums! We may have an interface for your vehicle. There are a few conditions that must be met. First, the factory radio must have a button labeled "DISC UP" and another button labeled "DISC DOWN". Also, the factory radio must not have a built-in CD changer (multi...
-
Alpine does make an iPod interface that will work with your CDA-9835. It is the Alpine KCA-420i iPod interface . This will allow you to control your iPod through your receiver. However, it does not charge the 2nd generation iPod Touch models. It will only transfer the audio and controls to the receiver...
-
Hi all, The iPhone 3G requires docking units, chargers, docking cables, etc., to charge the phone over the USB pins on the dock connector or head unit connector cable. If the cable or dock you use, as with my Alpine head unit, charges iPods/iPhones over the FireWire pins, then your head unit will not...
-
I've been using an ipod connection in one way or another for 5 years or more and recently my Neo Ion ipod attachment bit the dust. I've been set to replace it and finally decided to get a new head unit. I just received a Jensen VM9312HD and the iPod control is just terrible. It was slow and hasn't worked...
-
My PA11-HON from USA-SPEC, connected to a factory system on a 2001 Honda Civic EX, is not charging my iPod Mini (firmware 1.4.1) or my newer 80 GB iPod (firmware 1.3) with video. Both iPods charge consistently using the USA-SPEC I bought for my 2003 VW Passat, which is also connected to a factory system...
-
After just completing the installation of an Alpine CDA-9884 I found that the iPod controls were not functioning correctly. When the car is left w/o either pausing the iPod or powering off the Alpine, one of two things happens: 1) The iPod continues to run and is several tracks beyond where I left it...
-
I have the DNX7100 and a 16g touch with 1.1.2-ware and the 1.0.9 firmware update Yes-album art, full music control, audio for video as music files under artist names (no problems with function or errors) NO VIDEO PLAYBACK ON MONITOR! Any updates from fellow ipod touch owners looking for video playback...
-
this is not a perfect solution, but it's pretty damned good. i was dissatisfied with the "Error A0" message, so i started plugging and unplugging my iphone in to replicate the circumstances when it would actually function properly. what I discovered is that if you plug the iphone in slowly, it works...
-
Joe Cat: PLEASE IS THERE ANYONE OUT THERE THAT FOUND A HEADUNIT THAT IS SUPER AWEOSME WITH IPOD AND IF SO WHICH ONE! Wait a few years!!! I agree with your experience- current iPod integration is pathetic. I guess no one at audio manufacturers uses song ratings...
-
I need to know if the PIONEER CD-I200 iPOD ADAPTER supposed to sound better than playing it through the aux 1 output? Because when hooked up through the cable the sound is very very very distorted and when played through the aux 1 jack it is very very crisp and clear. HELP PLEASE!!!!!!!